PROMAT Insert SEKT1204AFFN-AL N20 aluminium machining

Chip breaker geometry AL = for aluminium processing Further technical information:
– d: 12.7mm
– Area of application: Aluminium processing
– r: 1.6mm
– d1: 5.5mm
– s: 4,76mm
– l: 12,7mm
– Max. feed rate: – mm/rev in steel / – mm/rev in stainless steel / – mm/rev in cast / 0.4 mm/rev in NI metals / – mm/rev in superalloys / – mm/rev in hardened steels
– Vc max.: – m/min in steel / – m/min in stainless / – m/min in cast / 680 m/min in NI metals / – m/min in superalloys / – m/min in hardened steels
– Vc min.: – m/min in steel / – m/min in stainless / – m/min in cast / 125 m/min in NI metals / – m/min in superalloys / – m/min in hardened steels
– Min. cutting depth: – mm in steel / – mm in stainless / – mm in cast / 0.2 mm in NI metals / – mm in superalloys / – mm in hardened steels
– Max. cutting depth: – mm in steel / – mm in stainless / – mm in cast / 4.5 mm in NI metals / – mm in superalloys / – mm in hardened steels
– Min. feed rate: – mm/rev in steel / – mm/rev in stainless steel / – mm/rev in cast / 0.05 mm/rev in NI metals / – mm/rev in superalloys / – mm/rev in hardened steels