PROMAT Insert VNMG160404-F PMK10 plain machining

For finishing = F Further technical information:
– d: 9.525mm
– Area of application: Finish processing
– r: 0.4mm
– d1: 3.81mm
– s: 4,76mm
– l: 16,6mm
– Max. feed rate: 0.2 mm/rev in steel / – mm/rev in stainless steel / 0.2 mm/rev in cast / – mm/rev in NI metals / – mm/rev in superalloys / – mm/rev in hardened steels
– Vc max.: 225 m/min in steel / – m/min in stainless / 210 m/min in cast / – m/min in NI metals / – m/min in superalloys / – m/min in hardened steels
– Vc min.: 180 m/min in steel / – m/min in stainless / 170 m/min in cast / – m/min in NI metals / – m/min in superalloys / – m/min in hardened steels
– Min. cutting depth: 0.5 mm in steel / – mm in stainless / 0.5 mm in cast / – mm in NI metals / – mm in superalloys / – mm in hardened steels
– Max. cutting depth: 3 mm in steel / – mm in stainless / 3 mm in cast / – mm in NI metals / – mm in superalloys / – mm in hardened steels
– Min. feed rate: 0.15 mm/rev in steel / – mm/rev in stainless steel / 0.15 mm/rev in cast / – mm/rev in NI metals / – mm/rev in superalloys / – mm/rev in hardened steels