PROMAT Insert CCGT060204R-HP UNI35 right

For a very light and soft cut for thin, long shafts and thin-walled material Further technical information:
– d: 6.35mm
– r: 0.4mm
– d1: 2.8mm
– s: 2,38mm
– l: 6,4mm
– Max. feed rate: 0.25 mm/rev in steel / 0.19 mm/rev in stainless steel / 0.25 mm/rev in cast / 0.25 mm/rev in NI metals / 0.15 mm/rev in superalloys / – mm/rev in hardened steels
– Vc max.: 260 m/min in steel / 155 m/min in stainless / 245 m/min in cast / 910 m/min in NI metals / 75 m/min in superalloys / – m/min in hardened steels
– Vc min.: 170 m/min in steel / 100 m/min in stainless / 160 m/min in cast / 255 m/min in NI metals / 30 m/min in superalloys / – m/min in hardened steels
– Min. cutting depth: 0.5 mm in steel / 0.5 mm in stainless / 0.5 mm in cast / 0.5 mm in NI metals / 0.5 mm in superalloys / – mm in hardened steels
– Max. cutting depth: 1.5 mm in steel / 1.1 mm in stainless / 1.5 mm in cast / 1.5 mm in NI metals / 0.9 mm in superalloys / – mm in hardened steels
– Min. feed rate: 0.08 mm/rev in steel / 0.08 mm/rev in stainless steel / 0.08 mm/rev in cast / 0.08 mm/rev in NI metals / 0.08 mm/rev in superalloys / – mm/rev in hardened steels