PROMAT Insert DNMG150604L-HP UNI35 left

For very light and soft cut for thin, long shafts and thin-walled material Further technical information:
– d: 12.7mm
– r: 0.4mm
– d1: 5.16mm
– s: 6,35mm
– l: 15,5mm
– Max. feed rate: 0.24 mm/rev in steel / 0.24 mm/rev in stainless steel / 0.24 mm/rev in cast / 0.24 mm/rev in NI metals / 0.24 mm/rev in superalloys / – mm/rev in hardened steels
– Vc max.: 170 m/min in steel / 100 m/min in stainless / 160 m/min in cast / 595 m/min in NI metals / 50 m/min in superalloys / – m/min in hardened steels
– Vc min.: 140 m/min in steel / 80 m/min in stainless / 130 m/min in cast / 210 m/min in NI metals / 25 m/min in superalloys / – m/min in hardened steels
– Min. cutting depth: 0.8 mm in steel / 0.8 mm in stainless / 0.8 mm in cast / 0.8 mm in NI metals / 0.8 mm in superalloys / – mm in hardened steels
– Max. cutting depth: 4.5 mm in steel / 3.4 mm in stainless / 4.5 mm in cast / 4.5 mm in NI metals / 2.7 mm in superalloys / – mm in hardened steels
– Min. feed rate: 0.2 mm/rev in steel / 0.2 mm/rev in stainless steel / 0.2 mm/rev in cast / 0.2 mm/rev in NI metals / 0.2 mm/rev in superalloys / – mm/rev in hardened steels