PROMAT Insert SEEN1203AFSN-F PK 940

Chip breaker geometry F = for finishing Further technical information:
– d: 12.7mm
– s: 3,2mm
– l: 12,7mm
– Max. feed rate: 0.34 mm/rev in steel / 0.26 mm/rev in stainless steel / – mm/rev in cast / – mm/rev in NI metals / – mm/rev in superalloys / – mm/rev in hardened steels
– Vc max.: 280 m/min in steel / 165 m/min in stainless / – m/min in cast / – m/min in NI metals / – m/min in superalloys / – m/min in hardened steels
– Vc min.: 135 m/min in steel / 80 m/min in stainless / – m/min in cast / – m/min in NI metals / – m/min in superalloys / – m/min in hardened steels
– Min. cutting depth: 1 mm in steel / 1 mm in stainless / – mm in cast / – mm in NI metals / – mm in superalloys / – mm in hardened steels
– Max. cutting depth: 6.5 mm in steel / 4.9 mm in stainless / – mm in cast / – mm in NI metals / – mm in superalloys / – mm in hardened steels
– Min. feed rate: 0.15 mm/rev in steel / 0.15 mm/rev in stainless steel / – mm/rev in cast / – mm/rev in NI metals / – mm/rev in superalloys / – mm/rev in hardened steels