PROMAT Insert SEET 1204AFEN:M8330 PMK30 plain machining

Chip breaker geometry F = for finishing Further technical information:
– d: 12.7mm
– Area of application: Finish processing
– d1: 5.5mm
– s: 4,76mm
– l: 12,7mm
– Max. feed rate: 0.4 mm/rev in steel / 0.4 mm/rev in stainless steel / 0.4 mm/rev in cast / – mm/rev in NI metals / 0.28 mm/rev in superalloys / 0.15 mm/rev in hardened steels
– Vc max.: 285 m/min in steel / 170 m/min in stainless / 270 m/min in cast / – m/min in NI metals / 85 m/min in superalloys / 55 m/min in hardened steels
– Vc min.: 215 m/min in steel / 125 m/min in stainless / 200 m/min in cast / – m/min in NI metals / 45 m/min in superalloys / 40 m/min in hardened steels
– Min. cutting depth: 0.5 mm in steel / 0.5 mm in stainless / 0.5 mm in cast / – mm in NI metals / 0.5 mm in superalloys / 0.1 mm in hardened steels
– Max. cutting depth: 6.5 mm in steel / 6.5 mm in stainless / 6.5 mm in cast / – mm in NI metals / 4.9 mm in superalloys / 1.5 mm in hardened steels
– Min. feed rate: 0.2 mm/rev in steel / 0.2 mm/rev in stainless steel / 0.2 mm/rev in cast / – mm/rev in NI metals / 0.2 mm/rev in superalloys / 0.05 mm/rev in hardened steels