Robert Bosch Power Tools GmbH V-groove bit, 1/4″, D1 6.3 mm, L 9.2 mm, G 45 mm, 90°. For hand-held routers
Sale ends in:
V-groove bit, 1/4″, D1 6.3 mm, L 9.2 mm, G 45 mm, 90°. For hand-held routers
V-groove bit, 1/4", D1 6.3 mm, L 9.2
PRODUCT DESCRIPTION
The Standard for Wood V-Groove Bit delivers a high cutting performance when carving fine lettering. Durability and reliable cutting results are achieved by its high-quality tungsten carbide cutters. Moreover, the bit prevents kickbacks by limiting the thickness of the generated chips. It is intended for carving thin decorative grooves and fine lettering as well as chamfering with a side fence in soft and hard solid wood and wood composites.
Article ID: 2608628630
ADDITIONAL INFORMATION
Shank Inch: 1/4
Angle degrees: 90
Diameter (D) mm: 6,3
Diameter (D) Inch: 1/4
Working length (L) mm: 9,2
Working length (L) Inch: 23/64
Total length (G) mm: 45
Total length (G) Inch: 1 49/64
Benefit HL (short): High Cutting Performance for Carving Fine Lettering
Performance Claim Text: Carving Fine Lettering
(Version) Key RTB: Durability and reliable cutting results are achieved by its high-quality tungsten carbide cutters
Specific RTB1: Bit design prevents kickbacks by limiting the generated chip-thickness
Specific RTB2: For carving thin decorative grooves, fine lettering and chamfering with a side fence in wood and wood composites
Material: Hardwood
Material: Particleboard
Material: Medium density fibreboard
Material: Plywood
Material: Softwood
SOL Date: 23.02.2005
Novelty: no
Scope of delivery:
1 ST V-groove bit, 1/4", D1 6.3 mm, L 9.2 mm, G 45 mm, 90°. For hand-held routers
Angle degrees: 90
Diameter (D) mm: 6,3
Diameter (D) Inch: 1/4
Working length (L) mm: 9,2
Working length (L) Inch: 23/64
Total length (G) mm: 45
Total length (G) Inch: 1 49/64
Benefit HL (short): High Cutting Performance for Carving Fine Lettering
Performance Claim Text: Carving Fine Lettering
(Version) Key RTB: Durability and reliable cutting results are achieved by its high-quality tungsten carbide cutters
Specific RTB1: Bit design prevents kickbacks by limiting the generated chip-thickness
Specific RTB2: For carving thin decorative grooves, fine lettering and chamfering with a side fence in wood and wood composites
Material: Hardwood
Material: Particleboard
Material: Medium density fibreboard
Material: Plywood
Material: Softwood
SOL Date: 23.02.2005
Novelty: no
Scope of delivery:
1 ST V-groove bit, 1/4", D1 6.3 mm, L 9.2 mm, G 45 mm, 90°. For hand-held routers
Related products
