PROMAT Insert CCGT09T304R-HP UNI35 right

For a very light and soft cut for thin, long shafts and thin-walled material Further technical information:
– d: 9.53mm
– r: 0.4mm
– d1: 4.4mm
– s: 3,97mm
– l: 9,7mm
– Max. feed rate: 0.3 mm/rev in steel / 0.23 mm/rev in stainless steel / 0.3 mm/rev in cast / 0.3 mm/rev in NI metals / 0.18 mm/rev in superalloys / – mm/rev in hardened steels
– Vc max.: 210 m/min in steel / 125 m/min in stainless / 195 m/min in cast / 735 m/min in NI metals / 60 m/min in superalloys / – m/min in hardened steels
– Vc min.: 155 m/min in steel / 90 m/min in stainless / 145 m/min in cast / 230 m/min in NI metals / 30 m/min in superalloys / – m/min in hardened steels
– Min. cutting depth: 0.8 mm in steel / 0.8 mm in stainless / 0.8 mm in cast / 0.8 mm in NI metals / 0.8 mm in superalloys / – mm in hardened steels
– Max. cutting depth: 2 mm in steel / 1.5 mm in stainless / 2 mm in cast / 2 mm in NI metals / 1.2 mm in superalloys / – mm in hardened steels
– Min. feed rate: 0.14 mm/rev in steel / 0.14 mm/rev in stainless steel / 0.14 mm/rev in cast / 0.14 mm/rev in NI metals / 0.14 mm/rev in superalloys / – mm/rev in hardened steels