PROMAT Insert CNMG120404R-HP UNI35 right

For a very light and soft cut for thin, long shafts and thin-walled material Further technical information:
– d: 12.7mm
– r: 0.4mm
– d1: 5.16mm
– s: 4,76mm
– l: 12,9mm
– Max. feed rate: 0.3 mm/rev in steel / 0.23 mm/rev in stainless steel / 0.3 mm/rev in cast / 0.3 mm/rev in NI metals / 0.23 mm/rev in superalloys / – mm/rev in hardened steels
– Vc max.: 215 m/min in steel / 125 m/min in stainless / 200 m/min in cast / 750 m/min in NI metals / 60 m/min in superalloys / – m/min in hardened steels
– Vc min.: 160 m/min in steel / 95 m/min in stainless / 150 m/min in cast / 240 m/min in NI metals / 30 m/min in superalloys / – m/min in hardened steels
– Min. cutting depth: 0.8 mm in steel / 0.8 mm in stainless / 0.8 mm in cast / 0.8 mm in NI metals / 0.8 mm in superalloys / – mm in hardened steels
– Max. cutting depth: 5 mm in steel / 3.8 mm in stainless / 5 mm in cast / 5 mm in NI metals / 3 mm in superalloys / – mm in hardened steels
– Min. feed rate: 0.2 mm/rev in steel / 0.2 mm/rev in stainless steel / 0.2 mm/rev in cast / 0.2 mm/rev in NI metals / 0.2 mm/rev in superalloys / – mm/rev in hardened steels